Reliability Analysis of Production in an Engineering System

Reliability Analysis of Production in an Engineering System
  IJETT-book-cover           
  
© 2024 by IJETT Journal
Volume-72 Issue-10
Year of Publication : 2024
Author : Yaqoob Al Rahbi
DOI : 10.14445/22315381/IJETT-V72I10P130

How to Cite?
Yaqoob Al Rahbi ,"Reliability Analysis of Production in an Engineering System," International Journal of Engineering Trends and Technology, vol. 72, no. 10, pp. 323-330, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I10P130

Abstract
This study aims to compare different reliability indices in order to enhance industry production processes. In this case, we are looking at a system with three parallel units. This study centers on reliability analysis, taking into account the availability, estimated busy period, Mean Time to System Failure (MTSF), and expected number of repairman visits. There is a backup unit for the primary unit. Semi-Markov and regenerative point methods have been used to assess the system’s performance. In the beginning, all three units will be functional, and a single repair facility will handle all required repairs. The repair time distribution is thought to be universal, but the unit failure time distribution is found to be exponential with variable parameters. Mean residence time, MTSF, system utilization time, steady state availability, and other critical reliability characteristics are examined. Graphs were used in the investigation process to further increase the study’s adaptability.

Keywords
Reliability, Markov process, Failure rate, Repair rate, Laplace transforms, Regenerative points.

References
[1] Zuhair A. Al Hemyari, and Syed Mohd Rizwan, “Reliability Analysis of a Two Unit System,” 2007 IEEE International Conference on Industrial Engineering and Engineering Management, Singapore, pp. 1265-1268, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Upasana Sharma, and Jaswinder Kaur, “Availability Analysis of a Standby System with Three Types of Failure Categories,” IOSR Journal of Mathematics, vol. 10, no. 2, pp. 23-28, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Ravinder Kumar, A.K. Sharma, and P.C. Tewari, “Performance Modeling of Furnace Draft Air Cycle in a Thermal Power Plant,” International Journal of Engineering Science and Technology, vol. 3, no. 8, pp. 6792-6798, 2011.
[Google Scholar] [Publisher Link]
[4] P.K. Bhatia et al., “Reliability Modelling of a 3-Unit (Induced Draft Fan) Cold Standby System Working at Full/Reduced Capacity,” International Journal of Mathematical Archive, vol. 3, no. 10, pp. 3737-3744, 2012.
[Google Scholar] [Publisher Link]
[5] Anjali Naithani et al., “Probabilistic Analysis of a 3-Unit Induced Draft Fan System with One Warm Standby with Priority to Repair of the Unit in Working State,” International Journal of System Assurance Engineering and Management, vol. 8, pp. 1383-1391, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Sanjay Gupta, and Suresh Kumar Gupta, “Stochastic Analysis of a Reliability Model of One-Unit System with Post Inspection, Post Repair, Preventive Maintenance and Replacement,” International Journal of Mechanical Engineering and Robotics Research, vol. 2, no. 2, pp. 179-188, 2013.
[Google Scholar] [Publisher Link]
[7] S.M. Rizwan, Joseph V. Thanikal, and Michel Torrijos, “A General Model for Reliability Analysis of a Domestic Waste Water Treatment Plant,” International Journal of Condition Monitoring and Diagnostic Engineering Management, vol. 17, no. 3, pp. 1-4, 2014.
[Google Scholar] [Publisher Link]
[8] S.M. Rizwan et al., “Reliability & Availability Analysis of an Anaerobic Batch Reactor Treating Fruit and Vegetable Waste,” International Journal of Applied Engineering Research, vol. 10, no. 24, pp. 44075-44079, 2015.
[Google Scholar] [Publisher Link]
[9] Jinting Wang, Nan Xie, and Nan Yang, “Reliability Analysis of a Two-Dissimilar-Unit Warm Standby Repairable System with Priority in Use,” Communications in Statistics-Theory and Methods, vol. 50, no. 4, pp. 792-814, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Ibrahim Yusuf, Bashir Yusuf, and Kabiru Suleiman, “Reliability Assessment of a Repairable System under Online and Offline Preventive Maintenance,” Life Cycle Reliability and Safety Engineering, vol. 8, pp. 391-406, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Drishty Goyal et al., “Reliability, Maintainability and Sensitivity Analysis of Physical Processing Unit of Sewage Treatment Plant,” SN Applied Sciences, vol. 1, pp. 1-10, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Nivedita Gupta, Monika Saini, and Ashish Kumar, “Operational Availability Analysis of Generators in Steam Turbine Power Plants,” SN Applied Sciences, vol. 2, pp. 1-11, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Monika Saini, and Ashish Kumar, “Stochastic Modeling of a Single-Unit System Operating Under Different Environmental Conditions Subject to Inspection and Degradation,” Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, vol. 90, pp. 319-326, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Ombir Dahiya, Ashish Kumar, and Monika Saini, “Modeling and Analysis of Concrete Mixture Plant Subject to Coverage Factor and Profust Reliability Approach,” Life Cycle Reliability and Safety Engineering, vol. 9, pp. 273-281, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Jamshaid Ul Rahman et al., “Mathematical Modeling and Simulation of Biophysics Systems Using Neural Network,” International Journal of Modern Physics B, vol. 38, no. 5, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Jamshaid Ul Rahman, Sana Danish, and Dianchen Lu, “Deep Neural Network-Based Simulation of Sel’kov Model in Glycolysis: A Comprehensive Analysis,” Mathematics, vol. 11, no. 14, pp. 1-9, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Jamshaid Ul Rahman, Sana Danish, and Dianchen Lu, “Oscillator Simulation with Deep Neural Networks,” Mathematics, vol. 12, no. 7, pp. 1-15, 2024.
[CrossRef] [Google Scholar] [Publisher Link]