Citation :

Vivek G, Lakshmipathy B, Ramesh P, Manivannan M, "Optimization and Simulation of a Solar Flat Plate Collector Using Response Surface Methodology and Computational Fluid Dynamics," International Journal of Engineering Trends and Technology (IJETT), vol. 74, no. 2, pp. 19-41, 2026. Crossref, https://doi.org/10.14445/22315381/IJETT-V74I2P102

Abstract

Solar collector technology has just taken a step forward to ensure that the thermal energy requirements of society are addressed. Development of solar thermal technologies has necessitated the need to employ both computational and experimental tools in an effort to optimise the performance of the system. The paper presents a holistic approach to optimising the thermal efficiency of solar flat plate collectors using Response Surface Methodology (RSM) and Computational Fluid Dynamics (CFD). Box-Behnken experimental design has been applied to determine the effects of main parameters, comprising mass flow rate, angle of inclination, and secondary riser inclination, on water outlet temperature. The thermal performance of both optimised and baseline designs was legitimised by CFD simulations. Findings have shown that CFD and RSM models are closely correlated with each other, and outlet temperature prediction has a low deviation of 0.167 K, which emphasizes the precision of the regression model. The highest thermal efficiency was recorded at secondary riser inclination of 11.141, mass flow rate of 23.628 kg/h, inclination angle of 7.226, which gave an outlet temperature of 351.448 K with a desirability score of 1.000. This CFD-RSM system is a powerful and affordable approach to optimization of solar collector designs, and helps to mitigate the need for large-scale experimental studies heavily, and offers scalable solutions to future solar thermal utilizations.

Keywords

Computational Fluid Dynamics (CFD), Outlet Temperature, Renewable Energy, Response Surface Methodology (RSM), Solar Flat Plate Collector, Thermal Optimization.

References

[1] Moslem Abrofarakh, and Hamid Moghadam, “Enhancing Thermal Performance and Reducing Entropy Generation Rate in Evacuated Tube Solar Air Heaters with Inserted Baffle Plate using Static Mixers: A CFD-RSM Analysis,” Thermal Science and Engineering Progress, vol. 55, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[2] Anil Singh Yadav, and Jiwanlal Bhagoria, “Heat Transfer and Fluid Flow Analysis of Solar Air Heater: A Review of CFD Approach,” Renewable and Sustainable Energy Reviews, vol. 23, pp. 60-79, 2013.
[CrossRef] [Google Scholar] [Publisher Link]

[3] Lotfi Ben Said et al., “Application of Box-Behnken Design with RSM to Predict the Heat Transfer Performance of Thermo-Magnetic Convection of Hybrid Nanofluid Inside a Novel Oval-Shaped Annulus Enclosure,” Case Studies in Thermal Engineering, vol. 61, pp. 1-27, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[4] Muhammad Mahmood Aslam Bhutta et al., “CFD Applications in Various Heat Exchanger Designs: A Review,” Applied Thermal Engineering, vol. 32, pp. 1-12, 2012.
[CrossRef] [Google Scholar] [Publisher Link]

[5] Jihyeok Choi et al., “Combination of Computational Fluid Dynamics and Design of Experiments to Optimize Modules for Direct Contact Membrane Distillation,” Desalination, vol. 524, 2022.
[CrossRef] [Google Scholar] [Publisher Link]

[6] Hanane Dagdougui et al., “Thermal Analysis and Performance Optimization of a Solar Water Heater Flat Plate Collector: Application to Tetouan (Morocco),” Renewable and Sustainable Energy Reviews, vol. 15, no. 1, pp. 630-638, 2011.
[CrossRef] [Google Scholar] [Publisher Link]

[7] Tiko Rago Desisa, “Experimental and Numerical Investigation of Heat Transfer Characteristics in Solar Flat Plate Collector using Nanofluids,” International Journal of Thermofluids, vol. 18, pp. 1-11, 2023.
[CrossRef] [Google Scholar] [Publisher Link]

[8] Alexander I.J. Forrester, András Sóbester, and Andy J. Keane, Engineering Design Via Surrogate Modelling: A Practical Guide, John Wiley & Sons, 2008.
[CrossRef] [Google Scholar] [Publisher Link]

[9] Celine Garnier, Tariq Muneer, and John Currie, “Numerical and Empirical Evaluation of a Novel Building Integrated Collector Storage Solar Water Heater,” Renewable Energy, vol. 126, pp. 281-295, 2018.
[CrossRef] [Google Scholar] [Publisher Link]

[10] Jiawei Gong, and Krishnan Sumathy, “9 - Active Solar Water Heating Systems,” Advances in Solar Heating and Cooling, pp. 203-224, 2016.
[CrossRef] [Google Scholar] [Publisher Link]

[11] Dawit Gudeta Gunjo, Pinakeswar Mahanta, and Puthuveettil Sreedharan Robi, “CFD And Experimental Investigation of Flat Plate Solar Water Heating System Under Steady-State Condition,” Renewable Energy, vol. 106, pp. 24-36, 2017.
[CrossRef] [Google Scholar] [Publisher Link]

[12] Ali S.Hussen, and Balewgize Amare Zeru, “Design, Optimization and CFD Simulation of Solar Air Heater with Jet Impingement on V-Corrugated Plate,” International Research Journal of Engineering and Technology (IRJET), vol. 7, no. 5, pp. 1805-1813, 2020.
[Google Scholar] [Publisher Link]

[13] Subramanian Jaisankar et al., “A Comprehensive Review on Solar Water Heaters,” Renewable and Sustainable Energy Reviews, vol. 15, no. 6, pp. 3045-3050, 2011.
[CrossRef] [Google Scholar] [Publisher Link]

[14] Mohammed Abdul Junaid et al., “Thermal Analysis of Solar Flat Plate Collector using CFD,” International Journal of Engineering Research and Technology (IJERT), vol. 6, no. 4, pp. 659-662, 2017.
[CrossRef] [Google Scholar] [Publisher Link]

[15] Soteris A. Kalogirou, “Solar Thermal Collectors and Applications,” Progress in Energy and Combustion Science, vol. 30, no. 3, pp. 231-295, 2004.
[CrossRef] [Google Scholar] [Publisher Link]

[16] Arash Kazemian et al., “Optimizing Photovoltaic Thermal Systems with Wavy Collector Tube: A Response Surface-based Design Study with Desirability Analysis,” Applied Thermal Engineering, vol. 258, pp. 1-62, 2025.
[CrossRef] [Google Scholar] [Publisher Link]

[17] V.S. Korpale et al., “Numerical Simulations and Optimization of Solar Air Heaters,” Applied Thermal Engineering, vol. 180, 2020.
[CrossRef] [Google Scholar] [Publisher Link]

[18] Korti Mohammed Choukri et al., “Optimizing Solar Water Heater Performance Through a Numerical Study of Zig-Zag Shaped Tubes,” Thermal Science, vol. 27, no. 4, pp. 3143-3153, 2023.
[CrossRef] [Google Scholar] [Publisher Link]

[19] Rohit Kumar, and Ram Gopal Verma, “Enhancing Solar Water Heater Performance Through ANSYS FLUENT: An Exploratory and Numerical Analysis,” International Journal of Engineering, Science and Mathematics, vol. 12, no. 7, pp. 1-11, 2023.
[Google Scholar] [Publisher Link]

[20] William L. Oberkampf et al., Verification and Validation in Scientific Computing, 2^nd ed., Cambridge University Press, 2010.
[Google Scholar] [Publisher Link]

[21] Eghosa Omo-oghogho, and Sufianu Adeiza Alıu, “Modelling of a Flat Plate Solar Collector System using Response Surface Methodology,” Black Sea Journal of Engineering and Science, vol. 3, no. 3, pp. 89-97, 2020.
[CrossRef] [Google Scholar] [Publisher Link]

[22] Krishna Murari Pandey, and Rajesh Chaurasiya, “A Review on Analysis and Development of Solar Flat Plate Collectors,” Renewable and Sustainable Energy Reviews, vol. 67, pp. 641-650, 2017.

[CrossRef] [Google Scholar] [Publisher Link]

[23] Zvawanda Paul, and Peace-Maker Masukume, “Efficiency Optimization in Solar Water Heaters: A Comparative CFD Study of Design Configurations,” Power Engineering and Engineering Thermophysics, vol. 2, no. 4, pp, 238-249, 2023.
[CrossRef] [Google Scholar] [Publisher Link]

[24] M.S.W. Potgieter, Christiaan R. Bester, and Muaaz Bhamjee, “Experimental and CFD Investigation of a Hybrid Solar Air Heater,” Solar Energy, vol. 195, pp. 413-428, 2020.
[CrossRef] [Google Scholar] [Publisher Link]

[25] Bose Prabhu et al., “Comprehensive Energy and Enviro-Economic Performance Analysis of a Flat Plate Solar Water Heater with a Modified Absorber,” Thermal Science and Engineering Progress, vol. 54, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[26] Bootan S. Qader et al., “RSM Approach for Modelling and Optimization of Designing Parameters for Inclined Fins of Solar Air Heater,” Renewable Energy, vol. 136, pp. 48-68, 2019.
[CrossRef] [Google Scholar] [Publisher Link]

[27] Ch. Reichl et al., “Comparison of Modelled Heat Transfer and Fluid Dynamics of a Flat Plate Solar Air Heating Collector Towards Experimental Data,” Solar Energy, vol. 120, pp. 450-463, 2015.
[CrossRef] [Google Scholar] [Publisher Link]

[28] S. Sadhishkumar, and Thangavel Balusamy, “Performance Improvement in Solar Water Heating Systems - A Review,” Renewable and Sustainable Energy Reviews, vol. 37, pp. 191-198, 2014.
[CrossRef] [Google Scholar] [Publisher Link]

[29] R. Soundararajan et al., “Design and Optimization of Solar Water Heater using CFD Analysis,” International Journal of Research in Advent Technology, vol. 3, no. 4, pp. 107-110, 2015.
[Publisher Link]

[30] Runsheng Tang, Yuqin Yang, and Wenfeng Gao, “Comparative Studies on Thermal Performance of Water-In-Glass Evacuated Tube Solar Water Heaters with Different Collector Tilt Angles,” Solar Energy, vol. 85, no. 7, pp. 1381-1389, 2011.
[CrossRef] [Google Scholar] [Publisher Link]

[31] Sabaa Theeyzen, and Basim Freegah, “The Effect of Added Wire Mesh on the Thermal Efficiency of the Flat Plate Solar Water Heater Collector,” Results in Engineering, vol. 24, pp. 1-12, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[32] R. Thejaraju et al., “CFD Analysis of Solar Flat Plate Collector with Semi-Circular Baffles,” International Journal of Mechanical and Production Engineering, vol. 5, no. 5, pp. 105-109, 2017.
[Google Scholar] [Publisher Link]

[33] Vineet Veer Tyagi, and D. Buddhi, “PCM Thermal Storage in Buildings: A State-of-the-Art,” Renewable and Sustainable Energy Reviews, vol. 11, no. 6, pp. 1146-1166, 2007.
[CrossRef] [Google Scholar] [Publisher Link]

[34] Poornodaya Venkata Krishna Varma Kola et al., “Optimization of Performance Parameters of a Double Pipe Heat Exchanger with Cut Twisted Tapes using CFD and RSM,” Chemical Engineering and Processing: Process Intensification, vol. 163, 2021.
[CrossRef] [Google Scholar] [Publisher Link]

[35] Elumalai Vengadesan, and Ramalingam Senthil, “A Review on Recent Development of Thermal Performance Enhancement Methods of Flat Plate Solar Water Heater,” Solar Energy, vol. 206, pp. 935-961, 2020.
[CrossRef] [Google Scholar] [Publisher Link]

[36] Gaurav Vyas, Raja Sekhar Dondapati, and Sudhanshu Dogra, “Thermal Efficiency Augmentation of Flat Solar Water Heater using Nanoparticles for Sustainable use in Industries,” Materials Today: Proceedings, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[37] Ye Wang et al., “Multi-Objective Optimization Design of Solar Air Collector with a Frustum-Shaped Protrusion,” Solar Energy, vol. 267, 2024.
[CrossRef] [Google Scholar] [Publisher Link]

[38] Samer Yassin Alsadi, and Tareq Foqha, “Mass Flow Rate Optimization of Solar Heating Systems based on Flat Plate Solar Collectors: A Case Study,” World Journal of Advanced Research and Reviews, vol. 12, no. 3, pp. 61-71, 2021.
[CrossRef] [Google Scholar] [Publisher Link]

[39] Lemi Negera Woyessa et al., “Design and CFD Simulation of Solar Water Heater used in Solar-Assisted Biogas System,” International Journal of Innovative Technology and Exploring Engineering, vol. 9, no. 3, pp. 371-380, 2020.
[CrossRef] [Google Scholar] [Publisher Link]

[40] Y.P. Yadav, and Gopal Nath Tiwari, “Large Scale Solar Water Heater: Experimental and Theoretical Studies,” Energy Conversion and Management, vol. 31. no. 4, pp. 337-351, 1991.
[CrossRef] [Google Scholar] [Publisher Link]

[41] Mohammed Yunus, and Mohammad S. Alsoufi, “Multi-Thermal Performance Optimization of Semi-Circular Heat Pipes Integrated with Various Solar Collector Profiles,” Renewables: Wind, Water, and Solar, vol. 8, no. 1, pp. 1-17, 2021.
[CrossRef] [Google Scholar] [Publisher Link]