A Very Compact Printed DGS Antenna for Ultra-Wide Band Applications
A Very Compact Printed DGS Antenna for Ultra-Wide Band Applications |
||
|
||
© 2023 by IJETT Journal | ||
Volume-71 Issue-8 |
||
Year of Publication : 2023 | ||
Author : Muthukumar Vellaisamy, D.Siva Sundhara Raja, R.Meenakshi, D. Rajesh Kumar, Haarindra Prasad, Deivasigamani.S |
||
DOI : 10.14445/22315381/IJETT-V71I8P223 |
How to Cite?
Muthukumar Vellaisamy, D.Siva Sundhara Raja, R.Meenakshi, D. Rajesh Kumar, Haarindra Prasad, Deivasigamani.S, "A Very Compact Printed DGS Antenna for Ultra-Wide Band Applications," International Journal of Engineering Trends and Technology, vol. 71, no. 8, pp. 263-268, 2023. Crossref, https://doi.org/10.14445/22315381/IJETT-V71I8P223
Abstract
This article presents a miniature printed Defected Ground Structure (DGS) antenna with a flawed ground structure for Ultra-Wide Band (UWB) implementations. The ultra-wideband antenna is created by fabricating it on an FR4 dielectric substrate that is 1.6 mm thick, has a dielectric constant (Ɛr) of 4.6, and has a tangential loss (ծ) of 0.02. The total area of the proposed antenna is about 30 x 28 mm2, and to improve its bandwidth, a defective ground plane has indeed been integrated into its design. The UWB antenna's total impedance bandwidth is 10 dB, and its operating spectrum runs from 3 to 10 GHz. The antenna has a substantial directivity of about 3.54 dBi over the whole of the requisite operating spectrum in every respect. In order to get an understanding of the design insight of the proposed antenna, the performance of the antenna was studied with the use of Smith charts. In terms of its radiation pattern and its directivity, the antenna has improved radiation properties. The overall performance of the antenna reveals that it has the potential to be a strong contender for usage in settings that need an ultra-wideband. This potential is shown by the fact that the antenna can transmit and receive signals across a broad frequency range.
Keywords
UWB, DGS, Circular patch, Radiation pattern, Directivity.
References
[1] FCC, Federal Communications Commission Revision of Part 15 of the Commission’s Rules Regarding Ultra-Wideband Transmission Systems, 2002.
[Google Scholar]
[2] Abdul Sami, MuhibUr Rahman, and Shahid Bashir, “Design of Compact Tri and Quad Band Band-Pass Filters Using Stub Loaded Resonators for Wireless Applications,” SN Applied Sciences, vol. 1, no. 9, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Raji George et al., “A Low Profile Reconfigurable Antenna for Defense Aircrafts,” SN Applied Sciences, vol. 1, no. 6, p. 608, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[4] M. J. Hossain, M. R. I. Faruque, and M. T. Islam, “Design of a Patch Antenna for Ultra-Wide Band Applications,” Microwave and Optical Technology Letters, vol. 58, no. 9, pp. 2152–2156, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Jianxin Liang et al., “Study of a Printed Circular Disc Monopole Antenna for UWB Systems,” IEEE Transactions on Antennas and Propagation, vol. 53, no. 11, pp. 3500-3504, 2005.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Z.N. Low, J.H. Cheong, and C.L. Law, “Low-Cost PCB Antenna for UWB Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 4, pp. 237–239, 2005. [CrossRef] [Google Scholar] [Publisher Link]
[7] Ching-Wei Ling et al., “Planar Binomial Curved Monopole Antennas for Ultrawideband Communication,” IEEE Transactions on Antennas and Propagation, vol. 55, no. 9, pp. 2622–2624, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Kin-Lu Wong, Saou-Wen Su, and Chia-Lun Tang, “Broadband Omni Directional Metal-Plate Monopole Antenna,” IEEE Transactions on Antennas and Propagation, vol. 53, no. 1, pp. 581–583, 2005.
[CrossRef] [Google Scholar] [Publisher Link]
[9] G Dattatreya et al., “Analysis of Complementary Split Ring Resonators on Rectangular Patch with Inset Feed for X-Band Application,” International conference of Electronics, Communication and Aerospace Technology, IEEE, pp. 248-250, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Tonmoy K. Saha et al., “A Compact Monopole Antenna for Ultra Wideband Applications,” Microwave and Optical Technology Letters, vol. 61, no. 1, pp. 182–186, 2019. [CrossRef] [Google Scholar] [Publisher Link]
[11] Rezaul Azim, Mohammad Tariqul Islam, and Norbahiah Misran, “Compact Tapered-Shape Slot Antenna for UWB Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 1190–1193, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Deepanshu Kaushal, T. Shanmuganantham, and K. Sajith, “Dual Band Characteristics in a Microstrip Rectangular Patch Antenna Using Novel Slotting Technique,” International Conference on Intelligent Computing, Instrumentation and Control Technologies, IEEE, pp. 957–960, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[13] FG Gharakhili et al., “Circular Slot with a Novel Circular Microstrip Open Ended Microstrip Feed for UWB Applications,” Progress in Electromagnetics Research, vol. 68, pp. 161–167, 2007.
[Google Scholar] [Publisher Link]
[14] J Liang et al., “Printed Circular Disc Monopole Antenna for Ultra-Wideband Applications,” Electronics Letters, vol. 40, no. 20, pp. 1246–1247, 2004.
[Google Scholar] [Publisher Link]
[15] M Abedian et al., “Ultrawideband Dielectric Resonator Antenna with WLAN Band Rejection at 5.8 GHz,” IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 1523–1526, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Amarveer Singh, and Ekambir Sidhu, "Multiresonantslotted Microstrip Patch Antenna (MPA) Design Forimt, WLAN & Wimax Applications," SSRG International Journal of Electronics and Communication Engineering, vol. 1, no. 5, pp. 19-23, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Ameya A Kadam et al., “Slit Loaded Circular Ultra-Wideband Antenna for Band Notch Characteristics,” National Conference on Communications, IEEE, pp. 1-6, 2019. [CrossRef] [Google Scholar] [Publisher Link]
[18] Müzeyyen Karamanoğlu, Mehmet Abbak, and Serkan Şimşek, “A Planar Ultra-Wideband Monopole Antenna with Half-Circular Parasitic Patches,” 13th Mediterranean Microwave Aymposium, IEEE, pp. 1-4, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Nilesh Kumar, Krishan Kumar Singh, and Ritesh K. Badhai, “A Tapered Feed Circular Monopole Super Ultra-Wideband (UWB) Printed Antenna,” International Conference on Communication and Signal Processing, IEEE, pp. 1943-1946, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Khalil H. Sayidmarie, and Yasser A. Fadhel, “Design Aspects of UWB Printed Elliptical Monopole Antenna with Impedance Matching,” Loughborough Antennas & Propagation Conference, IEEE, pp. 1–4, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Er. Richa Arora et al., "Design & Analysis of L-Shaped Fractal Antenna using Microstrip Line Feed and Inset Cut Line Feed Technique," SSRG International Journal of Electronics and Communication Engineering, vol. 6, no. 8, pp. 12-17, 2019.
[CrossRef] [Publisher Link]
[22] Sanjeev Kumar Mishra et al., “A Compact Dual-Band Fork-Shaped Monopole Antenna for Bluetooth and UWB Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 627–630, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Jui-Han Lu, and Chih-Hsuan Yeh, “Planar Broadband Arc-Shaped Monopole Antenna for UWB System,” IEEE Transactions on Antennas and Propagation, vol. 60, no. 7, pp. 3091–3095, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Praveen Kumar Rao, KM Jyoti Singh, and Rajan Mishra, “A Circular Shaped Microstrip Patch Antenna for Bluetooth/Wi-Fi/UWB/X-Band Applications,” International Conference on Power Energy, Environment and Intelligent Control, IEEE, pp. 638–641, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Eduardo J. B. Rodrigues, Hertz W. C. Lins, and Adaildo G. D'Assunção, “Reconfgurable Circular Ring Patch Antenna for UWB and Cognitive Radio Applications,” The 8th European Conference on Antennas and Propagation, IEEE, pp. 2744–2748, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Ousama Abu Safia, Amjad Omar, and Mourad Nedil, “CPW-fed UWB Antenna Based on Packing Congruent Circles in a Circular Patch,” 5th International Conference on Electronic Devices, Systems and Applications, IEEE, pp. 1-3, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Constantine A. Balanis, Antenna Theory: Analysis and Design, Wiley, New York, 2016. [Google Scholar] [Publisher Link] [28] Mukesh Kumar Khandelwal, Binod Kumar Kanaujia, and Sachin Kumar, “Defected Ground Structure: Fundamentals, Analysis, and Applications in Modern Wireless Trends,” International Journal of Antennas and Propagation, 2017.
[Google Scholar] [Publisher Link]
[29] Dattatreya Gopi, Appala Raju Vadaboyina, and J. R. K. Kumar Dabbakuti, "DGS based Monopole Circular-Shaped Patch Antenna for UWB Applications," SN Applied Sciences, vol. 3, no. 2, pp. 1-12, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[30] G. Narmadha et al., “Performance of Implantable Antenna at ISM Band Characteristics for Biomedical Base,” ICT Express, vol. 8, no.2, 2022, pp. 198-201, 2022. [CrossRef] [Google Scholar] [Publisher Link]
[31] RuaaShallal Abbas Anooz et al., "A G-Shape Slot Rectangular Microstrip Patch Antenna for Microwave Applications," SSRG International Journal of Electrical and Electronics Engineering, vol. 10, no. 6, pp. 43-49, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Kareem Madhloom Gatea, “Compact Ultra-Wideband Circular Patch Microstrip Antenna,” First National Conference for Engineering Sciences, IEEE, pp. 1-5, 2012. [CrossRef] [Google Scholar] [Publisher Link]
[33] Tahsin Ferdous Ara Nayna, Emranul Haque, and Feroz Ahmed, “Design of a X Band Defected Ground Circular Patch Antenna with Diamond Shaped Slot and Ring in Patch for UWB Applications,” International Conference on Signal Processing, Communication, Power and Embedded System, IEEE, pp. 559–562, 2016.
[CrossRef] [Google Scholar] [Publisher Link]