Effective Tensile Energy Absorption of Chitosan-Poly Lactic Acid Composite using Injection Molding Process
Effective Tensile Energy Absorption of Chitosan-Poly Lactic Acid Composite using Injection Molding Process |
||
 |
 |
|
| © 2023 by IJETT Journal | ||
| Volume-71 Issue-5 |
||
| Year of Publication : 2023 | ||
| Author : Putu Hadi Setyarini, Firda Ayu Hidayati, Daffa Ibtisaam Dhinasty, Slamet Wahyudi, Dwi Hadi Sulistyarini |
||
| DOI : 10.14445/22315381/IJETT-V71I5P219 | ||
How to Cite?
Putu Hadi Setyarini, Firda Ayu Hidayati, Daffa Ibtisaam Dhinasty, Slamet Wahyudi, Dwi Hadi Sulistyarini, "Effective Tensile Energy Absorption of Chitosan-Poly Lactic Acid Composite using Injection Molding Process," International Journal of Engineering Trends and Technology, vol. 71, no. 5, pp. 182-190, 2023. Crossref, https://doi.org/10.14445/22315381/IJETT-V71I5P219
Abstract
Significant amount of plastic being used has a negative effect on environmental sustainability, and plastic that has been buried in the ground is challenging to break down. A natural material that degrades quickly is biodegradable plastic. Polylactic Acid (PLA) is the primary component that is frequently utilized in the development of biodegradable polymers; however, PLA has drawbacks in large-scale production, particularly its extremely brittle character. It is important to add filler to PLA in order to improve the material's qualities due to its low elongation and toughness values. In this work, PLA was blended with chitosan at percentages of 100%, 98%, 96%, 94%, 92%, and 90% to enhance the mechanical capabilities of PLA. For chitosan, they are 0%, 2%, 4%, 6%, 8% and 10%. Chitosan and PLA are combined in an extrusion process that melts PLA and yields filaments through the use of the extrusion process. The outputs of the extrusion process are used for injection molding, after which they are melted and printed into the desired shape. The best results are obtained at a proportion of 98% PLA and 2% chitosan so that the energy absorption becomes bigger, according to the findings of the mechanical properties tests that have been conducted. The material injected at a temperature of 200°C has tighter holes than the material injected at a temperature of 175°C, as demonstrated by the microstructure test.
Keywords
PLA, Chitosan, Composite, Energy absorption, Injection molding.
References
[1] R. Grau-Andrés et al., “Burning Increases Post-Fire Carbon Emissions in a Heathland and a Raised Bog, but Experimental Manipulation of Fire Severity has no Effect,” Journal of Environmental Management, vol. 233, pp. 321–328, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Ayodeji Amobonye et al., “Plastic Biodegradation: Frontline Microbes and their Enzymes,” Science of the Total Environment, vol. 759, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Patricia Megale Coelho et al., “Sustainability of Reusable Packaging–Current Situation and Trends,” Resources, Conservation & Recycling: X, vol. 6, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Spyridoula Gerassimidou et al., “Development of an Integrated Sustainability Matrix to Depict Challenges and Trade-Offs of Introducing Bio-Based Plastics in the Food Packaging Value Chain,” Journal of Cleaner Production, vol. 286, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Natalia Reyna-Bensusan et al., “Experimental Measurements of Black Carbon Emission Factors to Estimate the Global Impact of Uncontrolled Burning of Waste,” Atmospheric Environment, vol. 213, pp. 629–639, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Mohamad Reza Pahlevi, and Dwi Suhartanto, “The Integrated Model of Green Loyalty: Evidence from Eco-Friendly Plastic Products,” Journal of Cleaner Production, vol. 257, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Maocai Shen et al., “(Micro)Plastic Crisis: Un-ignorable Contribution to Global Greenhouse Gas Emissions and Climate Change,” Journal of Cleaner Production, vol. 254, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Rachel M. Sorensen, and Boris Jovanović, “From Nanoplastic to Microplastic: A Bibliometric Analysis on the Presence of Plastic Particles in the Environment,” Marine Pollution Bulletin, vol. 163, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Tommaso Lomonaco et al., “Release of Harmful Volatile Organic Compounds (VOCs) from Photo-Degraded Plastic Debris: A Neglected Source of Environmental Pollution,” Journal of Hazardous Materials, vol. 394, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Anna (Anya) Phelan et al., “Plastic Pollution and Packaging: Corporate Commitments and Actions from the Food and Beverage Sector,” Journal of Cleaner Production, vol. 331, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Wen Yi Chia et al., “Nature’s Fight against Plastic Pollution: Algae for Plastic Biodegradation and Bioplastics Production,” Environmental Science and Ecotechnology, vol. 4, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Lindani Koketso Ncube et al., “Environmental Impact of Food Packaging Materials: A Review of Contemporary Development from Conventional Plastics to Polylactic Acid Based Materials,” Materials, vol. 13, no. 21, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Ana L. Patrício Silva et al., “Increased Plastic Pollution due to COVID-19 Pandemic: Challenges and Recommendations,” Chemical Engineering Journal, vol. 405, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Muhammad Fauzul Imron et al., “Future Challenges in Diesel Biodegradation by Bacteria Isolates: A Review,” Journal of Cleaner Production, vol. 251, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[15] A. Delacuvellerie et al., “Microbial Biofilm Composition and Polymer Degradation of Compostable and Non-Compostable Plastics Immersed in the Marine Environment,” Journal of Hazardous Materials, vol. 419, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Zeenat et al., “Plastics Degradation by Microbes: A Sustainable Approach,” Journal of King Saud University – Science, vol. 33, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Roberto Scaffaro et al., “Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review,” Polymers, vol. 11, no. 4, pp. 651, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Vesna Ocelić Bulatović et al., “Biodegradable Polymer Blends Based on Thermoplastic Starch,” Journal of Polymers and the Environment, vol. 29, no. 2, pp. 492–508, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Maurya Nagendra Kujmar, Vilsas Rastogi, and Pushpendra Singh, “Experimental and Computational Investigation on Mechanical Properties of Reinforced Additive Manufactured Component,” Evergreen, vol. 6, no. 3, pp. 207–214, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Amirhossein Lotfi et al., “Natural Fiber–Reinforced Composites: A Review on Material, Manufacturing, and Machinability,” The Journal of Thermoplastic Composite Materials, vol. 34, no. 2, pp. 238–284, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[21] G. Rajesh kumar et al., “Environment Friendly, Renewable and Sustainable Poly Lactic Acid (PLA) based Natural Fiber Reinforced Composites – A Comprehensive Review,” Journal of Cleaner Production, vol. 310, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Dhinakaran Veeman et al., “Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends,” International Journal of Polymer Sicence, vol. 2021, 2021,
[CrossRef] [Google Scholar] [Publisher Link]
[23] Chinmay Zinge, and Balasubramanian Kandasubramanian, “Nanocellulose Based Biodegradable Polymers,” European Polymer Journal, vol. 133, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[24] S. Satti Venu Gopala Kumari, Kannan Pakshirajan, and G. Pugazhenthi, “Recent Advances and Future Prospects of Cellulose, Starch, Chitosan, Polylactic Acid and Polyhydroxyalkanoates for Sustainable Food Packaging Applications,” International Journal of Biological Macromolecules, vol. 221, pp. 163–182, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Jaka Fajar Fatriansyah, Siti Norasmah Surip, and Hartoyo Fernanda, “Mechanical Property Prediction of Poly(Lactic Acid) Blends Using Deep Neural Network,” Evergreen, vol. 9, no. 1, pp. 141–144, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Nor Helya Iman Kamaludin et al., “Thermal Behavior and Water Absorption Kinetics of Polylactic Acid/Chitosan Biocomposites,” Iranian Polymer Journal, vol. 30, no. 2, pp. 135–147, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[27] O.O. Daramola et al., “Mechanical and Wear Behaviour of Polylactic Acid Matrix Composites Reinforced with Crab-Shell Synthesized Chitosan Microparticles,” Materials Today Proceedings, vol. 38, pp. 999–1005, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Shady Farah, Daniel G. Anderson, and Robert Langer, “Physical and Mechanical Properties of PLA, and their Functions in Widespread Applications — A Comprehensive Review,” Advanced Drug Delivery Reviews, vol. 107, pp. 367–392, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Hakima El Knidri et al., “Extraction, Chemical Modification and Characterization of Chitin and Chitosan,” International Journal of Biological Macromolecules, vol. 120, pp. 1181–1189, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Youngju Kim, and Ro-Dong Park, “Progress in Bioextraction Processes of Chitin from Crustacean Biowastes,” Journal of the Korean Society for Applied Biological Chemistry, vol. 58, no. 4, pp. 545–554, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[31] Yashvi Sheth et al., “An Environment Friendly Approach for Heavy Metal Removal from Industrial Wastewater Using Chitosan Based Biosorbent: A Review,” Sustainable Energy Technologies and Assessments, vol. 43, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Tariq Aziz et al., “Manufactures of Bio-Degradable and Bio-Based Polymers for Bio-Materials in the Pharmaceutical field,” Journal of Applied Polymer Science, vol. 139, no. 29, pp. 1–21, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[33] S. Nallusamy, and A. Karthikeyan, “Synthesis and Wear Characterization of Reinforced Glass Fiber Polymer Composites with Epoxy Resin Using Granite Powder,” Journal of Nano Research, vol. 49, no. 1, pp. 1–9, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[34] Ajahar Khan, and Khalid A. Alamry, “Recent Advances of Emerging Green Chitosan-Based Biomaterials with Potential Biomedical Applications: A Review,” Carbohydrate Research, vol. 506, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[35] Bai Qu, and Yangchao Luo, “Chitosan-Based Hydrogel Beads: Preparations, Modifications and Applications in Food and Agriculture Sectors – A Review,” International Journal of Biological Macromolecules, vol. 152, pp. 437–448, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[36] Lisman Suryanegara et al., “Novel Antimicrobial Bioplastic Based on PLA-Chitosan by addition of TiO2 and ZnO,” Journal of Environmental Health Science and Engineering, vol. 19, no. 1, pp. 415–425, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[37] Veronika Mikušová, and Peter Mikuš, “Advances in Chitosan-Based Nanoparticles for Drug Delivery,” International Journal of Molecular Sciences, vol. 22, no. 17, pp. 1–93, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[38] Huimin Zhou et al., “Preparation of Bio-Based Cellulose Acetate/Chitosan Composite Film with Oxygen and Water Resistant Properties,” Carbohydrate Polymers, vol. 270, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[39] Wanli Zhang et al., “Improving the Performance of Edible Food Packaging Films by Using Nanocellulose as an Additive,” International Journal of Biological Macromolecules, vol. 166, pp. 288–296, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[40] Mike Tromm et al., “Investigation of the Mold-Filling Phenomenon in High-Pressure Foam Injection Molding and Its Effects on the Cellular Structure in Expanded Foams,” Polymer, vol. 160, pp. 43–52, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[41] Pradeep Kumar Panda et al., "Exploration on Mechanical Behaviours of Hyacinth Fibre Particles Reinforced Polymer Matrix-Based Hybrid Composites for Electronic Applications,” Advances in Materials Science and Engineering, vol. 2021, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[42] Vito Gigante et al., “Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed,” European Polymer Journal, vol. 115, pp. 125-137,
[CrossRef] [Google Scholar] [Publisher Link]
[43] Andras Bartos et al., “Biobased PLA/Sugarcane Bagasse Fiber Composites: Effect of Fiber Characteristics and Interfacial Adhesion on Properties,” Composites Part A: Applied Science and Manufacturing, vol. 143, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[44] Sachin Patil et al., “Effect of Fly ash, Silica fume, Glass Fiber and Polypropylene Fiber on Strength Properties of Composite Fiber Reinforced High Performance Concrete,” International Journal of Engineering Trends and Technology, vol. 69, no. 5, pp. 69-84, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[45] Dilbag Singh Mondloe et al., “Investigation of Mechanical and Wear Properties of Novel Hybrid Composite based on BANANA, COIR, and EPOXY for Tribological Applications,” International Journal of Engineering Trends and Technology, vol. 70, no. 4, pp. 278-285, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[46] Jianjun Zhang, Guoxing Lu, and Zhong You, “Large Deformation and Energy Absorption of Additively Manufactured Auxetic Materials and Structures: A Review,” Composites Part B: Engineering, vol. 201, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[47] Sun Ho Go et al., “Correlation between Drop Impact Energy and Residual Compressive Strength According to the Lamination of CFRP with EVA Sheets,” Polymers, vol. 12, no. 1, 224, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[48] Jong-Whan Rhim, Hwan-Man Park, and Chang-Sik Ha, “Bio-nanocomposites for Food Packaging Applications,” Progress in Polymer Science, vol. 38, no. 10–11, pp. 1629-1652, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[49] Muhammad Shoaib Butt et al., “Enhanced Mechanical Properties of Surface Treated AZ31 Reinforced Polymer Composites,” Crystals, vol. 10, no. 5, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[50] Constantin Edi Tanase, and Iuliana Spiridon, “PLA/chitosan/keratin Composites for Biomedical Applications,” Materials Science and Engineering: C, vol. 40, pp. 242-247, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[51] Thomas Hahn et al., “Current State of Chitin Purification and Chitosan Production from Insects,” Journal of Chemical Technology & Biotechnology, vol. 95, no. 11, pp. 2775–2795, 2020.
[CrossRef] [Google Scholar] [Publisher Link]